Video Guys: Is there a .FLV splitter program? - GoFuckYourself.com

gleem · 08-27-2007, 11:43 AM

hey guys, is there such a thing as a .FLV splitter just like they have for WM's and MPEGS and stuff, I use Boilsofts WMV Splitter, works great causue it just splits the files into chumnk without having to re-render... how about one that works with FLV (flash) files?

gornyhuy · 08-27-2007, 11:48 AM

Not sure, so far I've been splitting whatever native format I have, then I convert the clips to flv.

Humpy Leftnut · 08-27-2007, 11:50 AM

Noe · 08-27-2007, 11:51 AM

Quote:

Originally Posted by gornyhuy

Not sure, so far I've been splitting whatever native format I have, then I convert the clips to flv.

same here

gleem · 08-27-2007, 11:53 AM

gonna try this guy out based on Pimproll dave's recommendation:
http://sourceforge.net/project/showf...kage_id=183318

Quote:

Originally Posted by gornyhuy

Not sure, so far I've been splitting whatever native format I have, then I convert the clips to flv.

I've been rendering the full 30 min scene in WMV, then rendering the 30 min in FLV. Then I use a splitter on the 30 min WMV into 9 parts, and then rendering the 9 part flv's from that, figure that was a stupid way to do it since it takes forever to re-render the entire thing in FLV again.. splitter is the way to go!

gornyhuy · 08-27-2007, 11:56 AM

Quote:

Originally Posted by gleem

gonna try this guy out based on Pimproll dave's recommendation:
http://sourceforge.net/project/showf...kage_id=183318

I was looking at that, but couldnt' quite figure out if it does what I think it does... based on the description.

Let us know how it works!

gleem · 08-27-2007, 12:08 PM

Quote:

Originally Posted by gornyhuy

Not sure, so far I've been splitting whatever native format I have, then I convert the clips to flv.

Quote:

Originally Posted by gornyhuy

I was looking at that, but couldnt' quite figure out if it does what I think it does... based on the description.

Let us know how it works!

ehh, same result here, it's a ".ax" file format, so from what info I can find on that extension it's a plugin add-on to some program, but the site doesn't say for which program... hmmmmmm

gleem · 08-27-2007, 12:14 PM

k, best lead for it I see is it's mentioned on this page:
http://www.degeelebosch.nl/corone/dsfp/main.htm

which points for it being a plugin for this:
http://en.wikipedia.org/wiki/DirectShow

I'm a mac guy, so when it comes to installing things on my PC I'm a bit weary since I'm guessing if I install Directshow it's gonna fuck something else up in WMP, and then my workstation is pretty much useless.

Oh well.. from what I can tell a decent FLV splitter does not exist.. period.. end of story.

Jim_Gunn · 08-27-2007, 12:52 PM

Not only does a .flv splitter app not exist, but a .mov auto-splitting app does not exist either. Boilsoft Splitter 4.28 can split WMV/mpeg/real.

I recently got some quotes from programmers to create such an app, most of them around $1000+ bucks.

xroach · 08-27-2007, 12:56 PM

splitting flv's isn't too difficult, inject meta data with flvmdi and split the data to taste, making sure to recreate the flv header for each new file

gleem · 08-27-2007, 01:05 PM

Quote:

Originally Posted by Jim_Gunn

Not only does a .flv splitter app not exist, but a .mov auto-splitting app does not exist either. Boilsoft Splitter 4.28 can split WMV/mpeg/real.

I recently got some quotes from programmers to create such an app, most of them around $1000+ bucks.

yeah? if they can make one like the WMV splitters which are pretty much instant file creations, I'd go in on that.

gleem · 08-27-2007, 01:08 PM

Quote:

Originally Posted by xroach

splitting flv's isn't too difficult, inject meta data with flvmdi and split the data to taste, making sure to recreate the flv header for each new file

ehh? I don't how to do the described and then make 9 little FLV files from 1 big FLV.. care to elaborate?

Pornwolf · 08-27-2007, 01:34 PM

Gleem, try using Flash Media Encoder's edit function when making parts from the source file in the future. I usually split video into flv parts this way.

It's pretty efficient.

Jim_Gunn · 08-27-2007, 05:55 PM

Quote:

Originally Posted by gleem

yeah? if they can make one like the WMV splitters which are pretty much instant file creations, I'd go in on that.

That is exactly what I got quoted on, on one of those FindAFreelancer web sites, basically someone to mimic the Boilsoft app's functionality except for flv and mov sources. The dozen or so quotes I received ranged from about $1000-$1500, from some programmers all over the world. If we got a few content producers to chip in it would be a very useful tool and only cost us a smallish amount of money each.

BV · 08-27-2007, 06:19 PM

what are you guys using to convert your wmv's or avis to flv?

gleem · 08-27-2007, 06:47 PM

On2's FLV converter:
http://www.on2.com/products/flix/

zand_stein · 08-27-2007, 07:01 PM

lash Video (".FLV" extension) is the format used to display video in Flash content. Most Flash Video content is viewed online (on sites such as YouTube), but in order to view .FLV content locally, you need a splitter installed.You will also need an FLV decoder installed. FFDShow can be enabled to play this format. You simply need to instruct it to decode "FLV1" content on the codec section of its configuration page.

Jim_Gunn · 08-27-2007, 09:11 PM

Quote:

Originally Posted by BV

what are you guys using to convert your wmv's or avis to flv?

I almost always start with full sized AVI files edited from SD or HDV footage as my sources to start with the best quality. I use Cleaner XL 1.5 or Sorenson Squeeze 4.5 to encode to Flash video. Squeeze is much faster than Cleaner XL plus it can use the ON2 VP6 codec for the best quality flash video. Only drawback is that Squeeze still can't add watermarks to the encoded files unlike Cleaner XL. If it wasn't for that I'd switch to Squeeze for all my encoding. But Cleaner's watermarks and filters are much more sophisticated than Squeeze and that wins out for me in everything except Flash video, or Ipod and PSP compatible files.

08-27-2007, 11:43 AM	#1
gleem Confirmed User Industry Role: Join Date: Jun 2001 Location: Sunny Land Posts: 5,593	Video Guys: Is there a .FLV splitter program? hey guys, is there such a thing as a .FLV splitter just like they have for WM's and MPEGS and stuff, I use Boilsofts WMV Splitter, works great causue it just splits the files into chumnk without having to re-render... how about one that works with FLV (flash) files? __________________ Contact me: \\// E: webmaster /at/ unprofessional.com

08-27-2007, 11:48 AM	#2
gornyhuy Chafed. Join Date: May 2002 Location: Face Down in Pussy Posts: 18,041	Not sure, so far I've been splitting whatever native format I have, then I convert the clips to flv. __________________ icq:159548293

08-27-2007, 11:50 AM	#3
Humpy Leftnut Confirmed User Join Date: Apr 2007 Posts: 1,292	__________________ Humpy Leftnut - Pornsumer Reviews

08-27-2007, 12:14 PM	#8
gleem Confirmed User Industry Role: Join Date: Jun 2001 Location: Sunny Land Posts: 5,593	k, best lead for it I see is it's mentioned on this page: http://www.degeelebosch.nl/corone/dsfp/main.htm which points for it being a plugin for this: http://en.wikipedia.org/wiki/DirectShow I'm a mac guy, so when it comes to installing things on my PC I'm a bit weary since I'm guessing if I install Directshow it's gonna fuck something else up in WMP, and then my workstation is pretty much useless. Oh well.. from what I can tell a decent FLV splitter does not exist.. period.. end of story. __________________ Contact me: \\// E: webmaster /at/ unprofessional.com

08-27-2007, 01:34 PM	#13
Pornwolf Drunk and Unruly Join Date: Jan 2002 Location: Hollywood Posts: 22,712	Gleem, try using Flash Media Encoder's edit function when making parts from the source file in the future. I usually split video into flv parts this way. It's pretty efficient. __________________ I've trusted my sites to them for over a decade... Webair, bitches.

08-27-2007, 12:52 PM	#9
Jim_Gunn Confirmed User Industry Role: Join Date: Feb 2003 Location: Where The Teens Are Posts: 5,702	Not only does a .flv splitter app not exist, but a .mov auto-splitting app does not exist either. Boilsoft Splitter 4.28 can split WMV/mpeg/real. I recently got some quotes from programmers to create such an app, most of them around $1000+ bucks.

08-27-2007, 12:56 PM	#10
xroach Confirmed User Join Date: Feb 2002 Location: vancouver, bc Posts: 963	splitting flv's isn't too difficult, inject meta data with flvmdi and split the data to taste, making sure to recreate the flv header for each new file

08-27-2007, 06:19 PM	#15
BV wtf Industry Role: Join Date: Sep 2001 Location: Bikini State, FL USA Posts: 10,914	what are you guys using to convert your wmv's or avis to flv?

08-27-2007, 06:47 PM	#16
gleem Confirmed User Industry Role: Join Date: Jun 2001 Location: Sunny Land Posts: 5,593	On2's FLV converter: http://www.on2.com/products/flix/ __________________ Contact me: \\// E: webmaster /at/ unprofessional.com

08-27-2007, 07:01 PM	#17
zand_stein Confirmed User Join Date: Jul 2007 Posts: 1,438	lash Video (".FLV" extension) is the format used to display video in Flash content. Most Flash Video content is viewed online (on sites such as YouTube), but in order to view .FLV content locally, you need a splitter installed.You will also need an FLV decoder installed. FFDShow can be enabled to play this format. You simply need to instruct it to decode "FLV1" content on the codec section of its configuration page. __________________ Paying Affiliates DAILY by ePassporte!